2. Selection by baseline/polarisation (mode b):

A new plot panel is created for each baseline and frequency selected.

Examples:
$>$ select 1aa - displays all baselines with antenna 1, polarisation AA, frequency 1.
$>$ select 12ba - displays baseline 1*2, polarisation BA, frequency 1.
$>$ select 14cc - displays baseline 1*4, polarisation AA, frequency 2.
$>$ select cd - displays all baselines, polarisation AB, frequency 2.
$>$ select 24 - displays baseline 2*4, all polarisations.

Note: The polarisation types must be enabled with the ON/OFF command - see below. Initially only AA, BB, CC and DD are enabled.

Then use one of the global display type commands to select the display type.
$>$ select bp11 - displays the bin profiles for baseline 1*1, all polarisations.
$>$ select pp11 - equivalent to above.

The bin profile plots the integrated amplitude spectrum against bin number. The limits of the integration, by default the entire spectrum, can be defined by the channels command.