Next: ASSISTANCE Reports Gated Total
Up: xbones-ACC Communications Problems
Previous: MPSERVER Restart
Contents
Index
ACC Reset
If the ACC itself has died, (the most accurate indicator of this
is the `warped' image in atdrivemon) you can restart it several different ways:
Figure 7.1:
An example of drivemon display with ACC on antenna 4 crashed
![\begin{figure}
\centering
\includegraphics[width=0.7\textwidth]{drivemon_ACC_crash.ps}
\end{figure}](Timg108.gif) |
- Use the reset button in PMON rack;
- Use the CAOBS command CAOBS> reset ca0#;
- From XBONES, execute the command XBONES$ accreset
You will be prompted for which antennas you want to include.
After resetting an ACC, you usually do not need to reset any other software,
though occasionally, you need to exit from CAOBS, and
restart the Legacy Server before you can restart observing.
Robin Wark
2006-10-24