Next: Everything Stops
Up: Checklist 3: Most Common
Previous: Attenuators, Sampler levels, GTP
Contents
Index
Problem: phase and delays are not pulled together after CACAL
Possible cause:
- you have started CACAL before the attenuators and delays have been stabilised -
try CACAL again,
- your observation have been affected by interference -
you can use interference free channels for calibration
(see Section 8.4.2 on page
for more details),
- you are working with a narrow passband (spectral-line observing mode) -
you will have to change your correlator configuration or use a stronger calibrator.
(See Section 7.5 on page
.)
Robin Wark
2006-10-24