This loads a font easier to read for people with dyslexia.
This renders the document in high contrast mode.
This renders the document as white on black
This can help those with trouble processing rapid screen movements.
Decrease text size Increase text size Reset text size
Accessibility menu
Search icon
Menu

ATCA Release notes for 2025OCT



BIGCAT RF installation: At schedule release, it is anticipated that the BIGCAT RF installation and commissioning (to upgrade BIGCAT to 8 GHz of bandwidth) will commence on November 18. Since this date is a little uncertain, the first schedule release is only until December 7. The schedule after this date will be released once the RF installation period firms up.

BIGCAT shared risk For this semester, we are still in the process of determining the best ways to operate our new BIGCAT correlator. We have also not yet completed documentation and training for BIGCAT operations. We will endeavour to help our observers to get high-quality data, but there will likely still be bugs in the system. If you are affected by any bugs, please let your observing expert know, and you can also send an email to the BIGCAT team (Elizabeth Mahony, Chris Phillips) and/or the ATCA operations team (Christoph Brem, Jamie Stevens), and we will try to help you out. We appreciate your patience while we improve our BIGCAT operations experience.

ATCA observing: ATCA observations may be conducted by trained observers at any location, including the Paul Wild Observatory, the Marsfield Science Operations Centre (SOC) or remotely.

To book on-site accommodation at either the observatory or Marsfield lodge, or just to register that you plan on observing at the SOC without requiring accommodation, please visit our online booking system, and make your booking at least two weeks in advance.

First-time observers are required to undergo a basic online training program, to learn the fundamentals of observing with the ATCA. Observers with prior experience are also welcome to participate in this training program.

This semester, we continue with our new support system where each project has their own Observing Expert who can provide support before, during and after observations.

To learn more about our basic training and the Observing Expert model, please visit the ATNF support page.

Observing experts (OEs) for each project this semester will be contacted by the observatory shortly after the schedule releases that shows that project. Each OE will be informed of their duties and responsibilities for their project, and given instructions for how to perform their role.

Registration to observe, or to undergo training, or to book accommodation will require you to have an ATNF UNIX account. If you need to obtain an account, please use the online request form. Please note that it may take several business days to process this request, so please make your request well in advance of your training or observing.

BIGCAT modes: At the beginning of the semester, BIGCAT has the following modes:

  1. the 1MHz continuum ("no zooms") mode,
  2. several zoom modes, each having the 1 MHz continuum, along with either:
    • four 2 MHz wide zooms per subband, each with 4096 channels, for a spectral resolution of 488 Hz
    • four 2 MHz wide zooms per subband, each with 32768 channels, for a spectral resolution of 61 Hz
    • two 8 MHz wide zooms per subband, each with 512 channels (spectral resolution 15.625 kHz), and two 16 MHz zooms per subband, each with 1024 channels (same spectral resolution)
    • one 64 MHz wide zoom per subband, with 8192 channels, for a spectral resolution of 7.8125 kHz

If none of these modes suit your science, please get in touch with the BIGCAT team (Elizabeth Mahony or Chris Phillips) to discuss your requirements.

ATCA portal: The portal is a web-based tool that enables the observers to book in advance for observing blocks and to register as the current observer-in-charge. It also provides alerts, contact details, and a chat facility. More details are available from the ATCA Users Guide. First-time users should refer to the ATCA Portal Beginners Guide.

NAPA Proposals: A number of NAPA (Non A Priori Assignable) proposals have been submitted for ATCA in 2025OCT. We have a policy for dealing with NAPA over-rides, intended to ensure highly time-critical projects can be scheduled on the telescope. For the 2025OCT semester, any NAPA which received a grade equal to or higher than the grade at which most of the projects got most of their time, will be able to over-ride any scheduled project. For this semester, thirty-eight NAPA projects meet this criteria.

If triggered, observatory staff will discuss with the proposers the best time for the over-ride to occur, which may not necessarily involve any project being displaced. Requests to trigger a NAPA proposal can be made by emailing the ATNF alert group, as described here.

Any observations displaced by a NAPA will be rescheduled if possible, but this is not guaranteed.

Investigators triggering NAPAs are reminded that claim staking is not permitted under ATNF policy.

In order to minimise the impact of multiple competing triggers to observe the same event, the TAC has recommended that we encourage data sharing between NAPA teams who nominate to observe the same coordinates with the same receiver configuration and observing strategy. Observatory staff will discuss this arrangement with the affected teams should this situation arise.

Green Time: Green time should be requested through the Portal. Instructions for doing this can be found in the "Book" tab in the Portal. Requests for green time can be made at any time during the semester, but the final allocation will not be made until 1 week beforehand.

Please also email the ATNF alert list (alert@atnf.csiro.au) with a summary of what you are requesting to observe, and why the time is required.

Only projects explicitly approved and that appear in the Portal schedule may be observed on the telescope. Under no circumstances can the telescope be used without prior permission from the Directors or the scheduler.

Daylight Saving: Daylight saving in New South Wales will start at 2:00am (AEDT) on Sunday, 5th October 2025, when clocks will be put forward one hour. AEDT is 11 hours ahead of UTC. Daylight saving in New South Wales will end again at 3:00am (AEST) on the first Sunday in April 2026.

Version history: Version 1 of the schedule was released on 2025 October 1.


Generated: Jamie Stevens (1-oct-2025)